Partex Direct Partex Direct is the new online store from Partex UK. Partex manufacture and distribute marking systems and electrical wiring accessories such as cable ties, crimp terminals, cord end ferrules, copper tube terminals, crimping tools, terminals blocks and pvc insulation tape.
Ferrules - Wire Insulated Uninsulated Ferrule - Crimping Tools, Tool Calibration, European Specifications at Ferrules Direct Ferrules - Wire Insulated Uninsulated Ferrule - What''s a wire Ferrule? A wire Ferrule is a connector used to terminate stranded wires. A wire Ferrule is normally crimped to a stranded wire using a crimping tool (compression , ratchet or pneumatic mechanism), thus turning the stranded wire into a solid one. Wire Ferrules are offered without insulation (uninsulated wire Ferrules), with plastic insulation for single wires (Single Insulated wire Ferrules) and with a plastic insulation to accommodate two wires (Twin wire Ferrules). Wire Ferrules are also offered in Strips or Spools to be used with automatic crimping machines or multi-function crimping tools. Uninsulated Wire Ferrules are used mostly in areas where space is at a premium, that is, in those tight places where traditional insulated wire Ferrules would not allow the end user to terminate the wire. Uninsulated wire Ferrules range in size from .14mm2 (28AWG) to 240.00mm2 (500MCM). Single Insulated Wire Ferrules are offered in three different series: Old DIN (W Series), DIN (D Series) and FRENCH (T Series). They range in size from .14mm2 (28AWG) to 150.00mm2 (5.0 O/D). Twin Wire Ferrules are also offered in the same three different series and range in size from 2x.50 mm2 (2x22AWG) to 2x16.00 mm2 (2x6AWG). Spools or Strips of Wire Ferrules are also offered in three different series and range in size from .50 mm2 (22AWG) to 2.50 mm2 (14AWG). What is the difference in wire ferrule series? The only difference among these three series of wire Ferrules is the COLOR of their insulation. All other physical and dimensional features are the same. Each wire Ferrule series has its own distinctive color sequence. ROHS: FerrulesDirect wire Ferrules are produced in accordance with WEEE � ROHS requirements of EC Directive on Waste Electrical and Electronic Equipment (WEEE) and EC Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (ROHS).
Ahuja Group - Quality Beyond Compare Ahuja Group is a team of passionate, innovative, committed young minds driven by an intuitive zeal serves our very purpose of seamless – thinking and working together and outperforming competition
WinMart - sell window machinery for uPVC, timber and glass Online marketplace for the window industry. Buy and sell uPVC, aluminium & glass machinery, plus tools, profile and anything that''s window related.
Home The Bead Warehouse specializes in semi precious stone beads, Beadalon beading wire, czech glass, seed beads and metal findings in sterling silver, gold-filled, 14K, and plated material. See our guide for beginner beading and crimping techniques.
RIDDHI PHARMA MACHINERY LTD | We are one of the Pioneer Pharmaceutical Machinery Manufacturers from India , We manufacture Machine RIDDHI PHARMA MACHINERY LTD in Mumbai ,We are one of the Pioneer Pharmaceutical Machinery Manufacturers from India , .
Electrical Connectors And Crimping Tools – Wirefyshop Wirefy is a manufacturer and retailer of electrical connectors and tools for a variety of wiring applications. Are you working on your boat, vehicle, or home electrical project? Wirefy will supply you with just the right terminals and tools for your upcoming wiring project.
Apex Custom Assembly Located in Apopka, Florida Apex Custom Assembly has a proven track record of producing high quality assemblies at competitive prices. We produce standard and custom cable assemblies, wiring harnesses for communications, automotive, military, medical, fiber optics and copper cabling
IProducts Aluminium and PVC Window Door making Machines India Iproducts is a manufacturer and supplier of PVC window and door making machines,Aluminium window and door making machines.Its wide range of products include Aluminium bar and PVC profile cutting/bending/milling/crimping/welding machines.
Fluiconnecto - WE KEEP IT RUNNING Fluiconnecto by Manuli, is a leading international service organization, focused on high pressure fluid connectors, providing products and application knowledge, as well as maintenance services through an ever growing network.
KliqPrensas A Melhor opção! A KliqPrensas vem fabricando máquinas para linha de montagem de mangueiras hidráulicas desde 2008. Contribuindo para o crescimento setores da industrias brasileiras e empresas prestadoras de serviços. Fabricando centenas de máquinas, bem como prensadoras de terminais, máquinas de corte, bancadas de testes, inseridores, suportes de mangueiras, descascadoras, prensas hidráulicas convencionais, enrolador de mangueiras, dispositivos de empatar mangueiras de incêndio, dispositivos personalizados e muito mais. Produtos de alta qualidade e de confiança. Sempre inovamos buscando facilitar e agilizar processos de montagens hidráulicas. Com garantias estendidas.
Wire & Cable Stripping & Crimping Machines & Equipment | Cablespeed Cablespeed are a UK leading supplier of wire and cable stripping and crimping machines and equipment as well as offering ultrasonic metal welding solutions.
Malcolm Barnecutt Bakery - Barnecutts Bakeries and Cafes, Cornwall Barnecutts bakeries and cafes throughout Cornwall offering the finest Cornish Pasties, Saffron Cakes, a wide range of mouth-watering confectionery.
Infilink Technologies Infilink Technologies is a manufacturer of Copper and Fiber Structured Cabling Solutions for the LAN and MAN environments and within the Telecommunications and Data sectors. Founded in 1998 to address Structured Cabling requirements within Data and Telecommunications sectors, the company has now grown into a multinational group with a vast global customer network. With the honesty, diligence, solidarity and creativity, the company’s leaders have gathered a group of highly qualified and efficient professionals to design, develop, and manufacture Structured Cabling Solutions to meet the current and future trends of Data and Telecommunication sector. The company dedicates extensive time and effort to R&D as well as production of high quality components by utilizing advanced test and inspection of components, in addition to adhering to strict quality management systems. With the goal of giving customers high-quality products and unparalleled service, product development and technological innovation are always our focus.
Perfumes | Essential Oils | Fragrances | Indian Attars The Perfumers is in to manufacturing of French style Perfumes and Essential Oils like Shamama, Amber, Patchouli, Nagarmota, Gulab, Motia, Khas, Lavender and more
Hair Styling | Face & Skin Treatments | Fahrenheit Salon & Spa, India Fahrenheit is a rapidly expanding chain of unisex L’Oreal salons that aims to provide the latest & best in hair, skin and spa services for the entire family
Hydraulic Hoses | Hydraulic Hose Fittings - Interpump Fluid Solutions Hydraulic Hoses and hydraulic hose fittings supplier. We are a global company offering service and sales of all hydraulic products and associated fittings for industrial and mechanical use. We manufacture hydraulic hoses, fittings and hose crimping machines. Contact us today for any requirements for your hoses.
LugsDirect.com for stocked, discount wire and cable lugs and connectors for use as wire terminals, splicing, reducing and grounding in electrical panels. Tin plated aluminum lugs are of mechanical screw type for reusability and freedom from special crimping tools.
Offer Fiber Optic Tool,Connection Modules,Fiber Optic System,Crimping Tools from China Manufacturer Dowell Industry Group Limited is specialized in producing Fiber Optic Tool,Connection Modules,Fiber Optic System,Crimping Tools,Patch Panels,Drop Wire Modules.
Al Hutaib Trading & Contracting - Electrical & Fastening Products catering to Steel Engineering | Construction | Rail & Metro Systems | MEP Contractors | Marine & Ship Repairs Yards | Oil & Gas Industries and Switchgear Industries | Markers in Qatar | Cable Ties in Qatar | Glands in Qatar | Bush in Qatar | Lugs & Insulated Products in Qatar | Crimping Tools Cutters in Qatar | Sockets & Plugs in Qatar | Fuses in Qatar | Buzzer & Siren in Qatar | Cable Drum - Duct Rods - Cables Rollers in Qatar | Assorted Electrical Products in Qatar Al Hutaib Trading & Contracting - Al Hutaib Trading & Contracting W.L.L which has been in Electrical & Fastening Products trading with a well experienced team in Doha - Qatar
Cables Accessories, Ferrules, Copper & Aluminum Lugs - Stone Stamcor Stone-Starmcor locally manufactures premium quality Copper and Aluminum Lugs and Ferrules, which are used extensively in rail, electrical installations, electrical contracting , mining, power generation, renewable energy and utilities sectors
Beading Buds - Mobile jewellery making birthday parties that come to you! A traveling beading craft party for birthdays and other get-togethers. Brings the beading supplies, the instructors and the fun!
Push To Connect | Quick Fitting Push Fit Plumbing Solutions Quick Fitting manufactures quick connect standards-compliant push fittings that connect to copper, CPVC, stainless steel or PEX tubing in seconds. Push to connect fittings require no soldering, no glues, no crimping and special tools.
Welcome to Conway Press Conway Press produces hydraulic presses in South Carolina with all US made parts. Our presses have proven themselves in reliability, easy of use, cost effectiveness, and safety.
Chromatography Research Supplies, Inc. Manufacturer of Chromatography supplies including electronic and manual crimping tools gas purifiers filters traps ferrules injection port septa sample vials caps seals GC accessories sample injection capillary columns
Dakota Electronics, Inc. - Crimptools.com Crimptools.com is the place to save money on factory new crimp tool prices. We have a very large selection of new and quality used tooling for same day shipping. With years of knowledge of the crimping tool industry.
QuestMasters Online Museum Home Page Welcome to QuestMasters - The foundation for the recovery and preservation of World War Two memorabilia for posterity. History of our Quest: The idea behind QuestMasters started during a recovery trip in Europe. After a long truck ride we realized that we were not only recovering and restoring World War Two memorabilia, but also going to the ends of the earth to do it. Hence - this is our Quest. Why we Quest? The Second World War lasted for over 6 years. For the United States, we were completely unprepared. Civilian companies quickly transformed into the American war machine. Small companies like Maytag, the washing machine company, made gun turrets for heavy bombers; Rock-Ola, a pin ball machine company, made rifles; Goodyear, the tire company, made fighter aircraft; Cadillac, the automobile company, made tank destroyers...and on and on. Farmboys, teachers, business men, barbers - men and women alike gave up their everyday jobs to put on a uniform, to fight for their country. They went to far-off lands, some unmapped - to fight and die. There was rationing and recycling. All gave some, and some gave all. Valor was a common virtue. And that is where we find ourselves, the children of a culture, responsible for the history of the sacrifice they made for us. Our goal: Our goal is the preservation of World War Two history. In the not too distant future, the breaths of those who were there making the history will no longer be able to tell the story. History is normally written by the victor, but this was a World War. It affected every country and every person, Allied and Axis. So, our focus is just that, to preserve the story, from both sides. It is our responsibility to tell their story. Webpage Header: WWII World War Two QuestMasters Quest Masters Museum Restoration Wanted Parts German 1940 10,5cm LFH18 - Light Field Howitzer 18 Germany 10,5cm le FH 18 leichte Feldhaubitze 18 Fried Krupp Essen 1940 Light Field Howitzer 105mm Steven Spielberg HBO mini-series Band Of Brothers Easy Company E Company 506th Parachute Infantry Regiment 506 PIR 101st Airborne Division World War Two Lt Spears D Company 506th PIR Episode 2 Day of Days QuestMasters Quest Masters Museum Restoration Wanted United States Ford GPW ¼ Ton Truck 52712 - Jeep 1/4 Ton 4x4 Truck Government Number G503 Model GPW Manufacturer Ford Motor Company Date of Delivery 12 August 1942 Serial Number 52712 Hood Number 20137713 QuestMasters Quest Masters Museum Restoration Wanted United States Ford GPW ¼ Ton Truck 69289 - Jeep Type 1/4 Ton 4x4 Truck Government Number G503 Model GPW Manufacturer Ford Motor Company Date of Delivery 30 September 1942 Serial Number 69289 Hood Number 20154290 Daimler Benz Gaggenau 1945 QuestMasters Quest Masters Museum Restoration Wanted United States Ford GPW ¼ Ton Truck 69289 - Jeep - Page 2 Type 1/4 Ton 4x4 Truck Government Number G503 Model GPW Manufacturer Ford Motor Company Date of Delivery 30 September 1942 Serial Number 69289 Hood Number 20154290 Daimler Benz Gaggenau 1945 QuestMasters Quest Masters Museum Restoration Wanted United States Dodge ¾ Ton Truck WC-54 Ambulance 713293 Type 3/4 Ton 4x4 Truck Government Number G502 Model WC-54 Ambulance Dodge Model T-214 Manufacturer Dodge Motor Company Date of Delivery November 1942 Serial Number 81560003 Hood Number 713293 WWII World War Two QuestMasters Quest Masters Museum Restoration Wanted Parts United States Willys MB ¼ Ton Truck 241969 - Jeep Type 1/4 Ton 4x4 Truck Government Number G503 Model MB Manufacturer Willys Overland Date of Delivery 1943 Serial Number 241969 Hood Number 20342091 WWII World War Two QuestMasters Quest Masters Museum Restoration Wanted Parts United States Willys MB ¼ Ton Truck 277074 - Jeep Type 1/4 Ton 4x4 Truck Government Number G503 Model MB Manufacturer Willys Overland Date of Delivery 1943 Serial Number: 277074 Hood Number WWII World War Two QuestMasters Quest Masters Museum Restoration Wanted Parts United States Studebaker T-24 Weasel Serial Number 991 Cargo Carrier Light Government Number G179 Model T-24 Weasel Studebaker Motor Company Date of Delivery 1943 Serial Number 991Registration Number prototype M-29 1942 M-29C BARGE WITH A CHARGE command vehicle HQ27 146th Engineer Combat Battalion ECB 1st Army Special Engineer Task Force Omaha Beach 1st Infantry Division June 6th 1944 H+03 hour United States 1 Ton “Ben Hur” Trailer G-518 Type Trailer 2 Wheel 1 Ton Cargo Government Number G-518 Untied States Checker Cab CC-1B 1 Ton 250 Gallon Water Trailer G-527 Type Trailer 1 Ton 2 Wheel Tank Water 250 Gallon Government Number G-527 Model: CC-1B Manufacturer Checker Cab Company Date of Delivery March 8th 1943 Serial Number 2709 U.S.A. Number Registration Number 0294301 Parts Manual TM 10-1395 Maintenance Manual TM 10-1395 United States Army Infantry Rifleman 29th Infantry Division Omaha Beach Normandy France June 6th 1944 German 2cm FLAK 38 German Germany Type 2cm 20mm FLAK 38 Model Flug Abwehr Kanone 38 Manufacturer 1944 Sonderanhanger 51 German 2cm FLAK 38 German Germany Type 2cm 20mm FLAK 38 Model Flug Abwehr Kanone 38 Manufacturer 1944 Sonderanhanger 51 Ammunition Boxes Crates German 2cm FLAK Ammunition box (left photo). This box is the early war style with metal end handles and painted ordnance tan. The partially obscured marking are "2cm Patr (Tr.)" which is for "2cm Patronen Tropen" (2cm Ammunition Tropical). This ammunition box was specifically packed for use in tropical climates.The 2cm FLAK Ammunition box in the right photo is also packaged for tropical use. Ammunition box label for 2cm High Explosive (Sprenggranat) Ammunition (Patronen) with Yellow (gelb) Tracer (L''spur), left photo.Ammunition box label for 2cm Armor Piercing (Panzergranat) Ammunition (Patronen) with Red (rot) Tracer (L''spur) Tropical (Tp) in steel shell casings (blue vertical stripe), right photo. Ammunition box label for 2cm Armor Piercing (Panzergranat) Ammunition (Patronen) with Red (rot) self destroying (red Z) Tracer (L''spur), in steel shell casings (blue vertical stripe) left photo.Ammunition box label for 2cm High Explosive (Sprenggranat) Ammunition (Patronen) with Red (rot) Tracer (L''spur), in steel shell casings (blue vertical stripe), right photo. Ammunition box label for 2cm Incendiary (Brand) High Explosive Ammunition (Sprenggranatpatronen) with Red (rot) Tracer (L''spur), left photo. Note very late 1945 production date.Ammunition box label for 2cm Incendiary (Br.) High Explosive Ammunition (Sprgr-Patronen) with Red (rot) Tracer (L''spur), in steel shell casings (blue vertical stripe), right photo. External ammunition box stenciling: Luftwaffen-Munition (Air Force Ammunition), left photo. Heeres-Munition (Army Ammunition), right photo. Equipment and ammunition was procured independently via separate contracts within the German Wehrmacht or Armed Forces during World War Two. Equipment and ammunition was specifically marked for the branch of service that it was ordered. It was not uncommon though to find supplies re-routed due to wartime shortages, United States Army Infantry Officer 36th Infantry Italy December 1943 U.S. Army Infantry Officer 36th Infantry Division San Pietro - Liri Valley, Italy December 1943 United States Army Air Force Heavy Bomber Pilot Western Europe 1944 U.S. Army Air Force Heavy Bomber Pilot Western Europe 1944 United States Army Air Force Heavy Bomber Pilot Western Europe 1944 U.S. Army Air Force Heavy Bomber Pilot Western Europe 1944 QuestMasters Aircraft United States Country United States Type: B-24J Heavy Bomber Manufacturer Consolidated Factory San Diego, Ca.Year 1944 Serial Number:B-24J-155-C0 44-40332 Country United States Type SNJ Advanced Trainer (Navy) Manufacturer North American Factory: Unknown Year 1944 Serial Number SNJ-5B 84947 Country United States Type LNE-1 Glider Trainer (Navy) Manufacturer Pratt Read Factory Deep River, Connecticut Year 1943 Serial Number LNE-1 31556 Country: United States Type UC-45F Cargo Aircraft (AAF) Manufacturer Beechcraft Factory Not Available Year 1943 Serial Number UC-45F 43-35764 Country United States / Canada Type PT-26A Primary Trainer (AAF) Cornell II (RCAF) Manufacturer Fleet Factory Ontario, Canada Year 1943 Serial Number: PT-26A 42-71104 Country United States Type CG-15A Glider (AAF) Manufacturer Waco Factory Not Available Year 1944/1945 Serial Number Not Available Country United States Type CG-4A Glider (AAF) Manufacturer Not Available Factory Not Available Year Not Available Serial Number Not Available Country United States Type P-61 Night Fighter (AAF) Manufacturer Not Available Factory Not Available Year Not Available Serial Number Not Available QuestMasters Aircraft Archeology U.S. Army/USMC Curtis A25-A (SB2C-1A "Helldiver")This is quite an unusual find. This rare aircraft started its life as a United States Navy SB2C "Helldiver". During the Second World War the Army ordered 900 "Helldivers" and renamed them A25-A. The U.S. Army later transferred the aircraft to the USMC and renamed the SB2C-1A. The history of this aircraft is unknown. The aircraft is seen (recovered from Barbers Point Naval Air Station, Hawaii) in an overall olive green paint scheme with grey undersides. It is interesting to note that two U.S. insignia are painted on the sides of the aircraft (this is due to war time repainting at different periods - exposure to the elements have uncovered both insignia). U.S. Army B-17F "Flying Fortress" named "LOS LOBOS".This is the starboard side of the nose section. Under "LOS LOBOS" is also painted "ROVER BOY". The history of this aircraft is uknown. U.S. Army B24D-13-CO-41-23938This aircraft is believed to be a Consolidated B-24D Liberator due to the fact that it crashed near several other B-24D Liberators of the same or near serial number. This aircraft was found near Wheeler Army Air Force Base, January 1996, in Hawaii. The photo depicts the forward starboard section of a B-24 Liberator painted in olive drab with the number 938 stenciled in yellow below the navigators window. This section of the B-24 has been recovered for the QuestMasters Museum for preservation. Any further information on this aircraft would be greatly appreciated. U.S. Army B24J-155-CO-44-40332This Consolidated B-24J Liberator was found in February 1993 in Aiea, Hawaii. Built in March 1944, "44-40332" crashed on May 5th, 1944 due to an on-board fuel problem. "332" was on her maiden voyage from California for final assignment to the 5th A.A.F. in Australia. All ten crew members were killed on impact having never seen a day of combat. Upon impact, "332" burst into flames nearly destroying the entire aircraft. "332" did not carry any unit markings, or nose art. Today only "332''s" right and left wing with wheels, four engines, tail turret, and many small parts remain on the impact site. The Nose section, from the cockpit forward, and the Martin 250 upper turret have been recovered for restoration in the QuestMasters Museum. U.S. Army B24J-80-CO-42-10021XThis Consolidated B-24J Liberator was found near Wheeler Army Air Force Base, January 1996, in Hawaii. Very little is known of the history of this B-24. Only part of the tail was found, as seen in this photo. No fire damage was found on the remains at the crash site. This was an early B-24J as noted by the olive-green paint that remained on the vertical stabilizer. Later B-24 Liberators were unpainted to save both materials and total aircraft weight (approximately 1000 pounds). The serial number was found to be partly obscured, so the last digit is represented by an "X". The only unit markings found on the aircraft were four horizontal lines on the vertical stabilizer. Due to extensive corrosion only the serial number section was recovered for preservation at the QuestMasters Museum. U.S. Army B24D-10-CO-41-23901This Consolidated B-24D Liberator was found on the Wailua Sugar Cane Plantation near Waimea Falls, 1994, in Hawaii. This aircraft crashed March 1942 during a routine coastal patrol of the Hawaiian coast. Three of her eight man crew died in the crash. Official Army Air Force reports concluded that the aircraft was on final approach when fuel ran out and the pilot ditched the aircraft in a sugar cane field. The aircraft remains today in a very sorry state. The aircraft was stripped in the late 1980''s for aluminum scrap, but many pieces remain on the crash site. Due to the lack of fuel on-board the aircraft, very little fire damage to the aircraft is present. The aircraft was painted in an overall olive drab paint scheme with "early" wartime U.S. insignia. Several small pieces were recovered for the QuestMasters Museum including the port wing star (seen in photo), an E-6B flight computer, several gun chutes, a mess kit, a match container, multiple .50cal armor piercing rounds and a propeller hub from one of the engines. Curtis P-36A 38-16 and P-36A 38-70This P-36A crashed on the Wailua Sugar Cane plantation, Oahu Hawaii U.S.A., due to a mid-air collision between Lt Ulysses S. O''Hern (P-36A 38-16) and Lt Richard A. Toole (P-36A 38-70) on July 12, 1941 0915 AM. Both aircraft were from the 45th Pursuit Squadron, 15th Pursuit Group, 7th Air Force. U.S. Navy TBM-1C "Avenger"This Navy TBM-1C "Avenger" was also found on Barbers Point Naval Air Station, Hawaii. The aircraft was recovered by QuestMasters and is seen prior to disassembly for shipment. This aircraft served with a training squadron on Barbers Point Naval Air Station, Hawaii U.S.A., until a young U.S. Navy Ensign "ground-looped" the ill-fated plane (his third and yes final crash). The Ensign was unhurt but the aircraft was struck from inventory due to extreme damage. This TBM-1C sat for 50 years in the runway bushes of Barbers Point NAS until recovered in the mid-1990''s. QuestMasters Artillery Country Germany Type 10,5cm 105mm LFH 18 Manufacturer Krupp Year 1940 Serial Number 17 Country Germany Type 7,5cm 75mm PAK 40 Maker Not Available Year 1944 Serial Number Not Available Country Germany Type 2cm 20mm FLAK 38 Maker Not Available Year 1944 Serial Number Not Available United States Consolidated B-24 Heavy Bomber United States Consolidated B-24 Heavy BomberB-24J-155-CO-44-40332 CREW LISTWayne R. Kimble, 2nd Lt., Pilot - K.I.A.William E. Somsel Jr., 2nd Lt., Co-Pilot - K.I.A.Charles E. Mueller, 2nd Lt., Navigator - K.I.A.Morris Righthand, 2nd Lt., Bombardier - K.I.A.Jack J. Dowd, Staff Sgt., Gunner - K.I.A.Marion F. Norman, Staff Sgt., Gunner - K.I.A.James H. Means, Sgt., Gunner - K.I.A.Manual F. Campos, Cpl., Gunner - K.I.A.Gerald L. Weiss, Cpl., Gunner - K.I.A.Joseph J. Carlucci, Cpl., Gunner - K.I.A. This is a Motor Products hydraulic nose turret that will be used in this restoration project. This specific turret was found in a scrap yard in Macon, GA. The original nose turret for this B-24J was recovered but was destroyed beyond repair. During 1943-1944 the Consolidated San Diego factory ran out of Emerson electric nose turrets for their B-24J’s. A quick modification found the remaining B-24J’s made in San Diego with tail turrets mounted on the front of the aircraft (with the replacement of the nose turret electric systems with hydraulic systems). This production modification was only conducted at the Consolidated San Diego factory. Many earlier B-24s with "Green House" noses were converted using a very similar principal. This is the center fuselage section (frames 5.1 to 7.1) of B-24L-20-FO-44-50022. This B-24, recovered from Canada, was originaly built by the Ford Motor Company in Willow Run, Dearborn Michigan. This aircraft was transferred to the Royal Canadian Air Force as Liberator Mk VIII and served briefly with the R.C.A.F. until the end of the war (note production A.A.F. markings over painted with R.C.A.F. markings). After the war this B-24 was scrapped in Canada. This section will be used in the restoration of B-24J-155-CO-44-40332. This is the Martin 250 upper turret. This turret was also recovered from a scrap yard in Macon, GA. for the restoration of this B-24J. The original M-250 upper turret from this aircraft was completely destroyed, but was recovered. The original turret was manufactured by "MAYTAG". After World War Two Maytag produced washing machines. This is the starboard nose section of this B-24J (frames 0.1 to 0.3). This is where 2nd Lt. Charles E. Mueller and 2nd Lt. Morris Righthand lost their lives. The severity of the crash can be clearly seen. The fragment to the extreme left is the front frame (0.1) for entry into the nose turret (missing door). The fragment in the extreme bottom of the photo is the armored plate with B-7 mount for the Norden Bombsight. The C-1 Bombsight Stabilizer was recovered from the crash site, but the Bombsight was missing. On the outside of the aircraft skin is the hand painted Consolidated build number 4268. This is the port nose section of this B-24J (frames 0.1 to 0.2). The extreme right fragment shows the entry frame to the nose turret with door attached. The extreme top fragment is the Astro-Dome for the Astro-Compass. The Astro-Compass was used for nighttime navigation. The following pictures are other B-24 parts that have been recovered for the restoration of this B-24 aircraft.In the center of the left photo is the Nose Landing Gear Wheel.This wheel utilized a 36 Inch S.C. 10 ply tire. United States Consolidated B-24 Heavy Bomber COCKPIT PARTS United States Consolidated B-24 Heavy Bomber COCKPIT PARTS Stations (Frames) 1.0 through 3.0 - Pilot and Co-Pilot Pilot control wheel assembly with control wheel attached, left photo.Co-Pilot control wheel assembly, missing wheel and internal parts, right photo. Pilot (left) and Co-Pilot (right) Auxiliary Instrument Panels, left photo. Pilots Instrument Panel: (3) Type E-4 Hydraulic Pressure Gages, (1) AN-G-24 Suction Gage and Pilot vent. Co-Pilot Instrument Panel: (2) AN-5795-6 Carburetor Gages and Co-Pilot Vent.Right photo, Top Row (L to R): Radio Compass Control Indicator with mount (used only on early B-24''s), Turbo Boost Selector, Radio Compass and Mount. Bottom Row (L to R) Engine Switch Panel - Starter and Primer Switches (Co-Pilot side of cockpit), BC-451 Command Radio Control Box (mounted on Pedestal Assembly), Fast Feathering Switch for No. 4 Engine, and switch from Pedestal Mount. Pilot Seat (left photo). Pilot Seat is missing head rest, head rest cushion, back cushion, seat cushion and complete knee pad and support.Co-Pilot Seat (right photo). Complete with floor track attached. Missing head rest cushion, back rest cushion, seat cushion, arm rest upholstery and knee pad upholstery. Pilot left and right Rudder Pedals with cockpit floor, left photo.Co-Pilot right Rudder Pedal with cockpit floor, right photo. Pilot cockpit enclosure vent window, missing plexiglass, left photo. Shown from inside of window.Co-Pilot cockpit enclosure vent window, right photo. Shown from outside of window. Co-Pilot fuse box, left photo. Missing fuses and cover. Mounted on Co-Pilot side of fuselage.BC- 434 Radio Control Box (top), BC-450 Radio Control Box (bottom), right photo. Mounted on the cockpit enclosure center frame. BC-765 Radio Switchbox, left photo. This box was used to destroy the "special radio" equipment on the B-24 so that it would not be captured by the enemy. Located above the instrument panel below the windscreen.Spare Pilot or Co-Pilot cockpit floor, right photo. Note markings for Rudder Pedal settings. Instrument panel support assembly, above photo. The support assembly, was the lower part of the instrument panel and allowed the attachment of the Auxiliary Instrument Panels and Control Wheel Assemblies. The above photo shows the pilot section of the support, with oxygen gages attached and the rear of the co-pilot support assembly. Four Oxygen Regulator Mounts (left photo). Each mount contained one Type A-12 or A-12A Oxygen Regulator,AN 6021-1 Oxygen Pressure Gage and AN 6029-1 Oxygen Flow Indicator. One mount was located on either side of the Pilot and Co-Pilot.Seven BC-366 Radio Jack Boxes (right photo). The BC-366 Jack Box was used to connect the microphone and headset to the radio system. Only two BC-366 Jack Boxes would have been used in the B-24 cockpit. The other five will be used in other areas of the B-24 during this restoration. Six Type Q-1B Heated Flight Suit Rheostat (left photo). Only two Q-1B''s would be used in the cockpit, the other four will be used in other areas of the B-24 during this restoration.Operating Instructions For AN/ARN-7 Radio Plate (right photo). This plate was located next to the BC-450 Radio Control Box mounted on the cockpit enclosure center frame. United States Consolidated B-24 Heavy Bomber COCKPIT PARTS United States Consolidated B-24 Heavy Bomber COCKPIT PARTS Stations (Frames) 3.0 through 4.1 - Radio Operator and Top Turret Radio Operator Table with BC-348 Liaison Radio Receiver, AN-3047 Work Table Light Assembly, J-37 Morse Code Key and Radio Operator''s Information File. J-37 Morse Code Key and Monitor Switch, left photo. Note original "RADIO CALL" number 449157 painted below switch. This Radio Table was removed from Ford B-24L-1-FO-44-49157.BC-348 Liaison Radio Receiver with FT-154 Receiver Mount, right photo. BC-306 Antenna Tuning Unit with FT-142 Antenna Tuning Unit Mount, left photo.PE-73 Dynamotor Unit with FT-107 Dynamotor Mount, right photo. Fuel Sight Gage, left photo.Main Fuel Tank Selectors Panel, right photo. Power Panel Switch Box Cover with (4) Type E-1 Amperage Gages, left photo. Missing Power Switch Box GK32E1043and Type B-1 Voltmeter.Trailing Antenna, right photo. FT-470 Mounting (Top), M235 Antenna Wire (Left), RL-42 Antenna Reel (Right) Radio Operator Seat Support Assembly (Above). Bombardier''s seat assembly (left photo). This style of seat was only used on early B-24''s with the "greenhouse" style nose. This seat is very similar to the Radio Operator''s seat assembly, and this seat will be used with the support pictured above. BC-221 Frequency Meter (left photo).TM 11-300AE BC-211 Manual datedAugust 7th 1943(right photo). United States Consolidated B-24 Heavy Bomber TAIL PARTS United States Consolidated B-24 Heavy Bomber TAIL PARTS Stations (Frames) 4.4 through 6.0 - Command Deck BC-357 Radio Receiver with FT-161 Mount and CD-365 Cord, left photoBC-453, BC-454 and BC-455 Radio Receiver with FT-220 Radio Rack, right photo. FT-220 Rack is missing the FT-221 Mount. BC-457 Radio Transmitter with FT-226 Radio Rack. The FT-226 Radio Rack is missing the BC-459 Radio Transmitter andFT-227 Radio Rack Mount. BC-645 Radio Receiver and Transmitter, left photo. The BC-645 is missing the FT-255 Radio Mount.Tag attached to BC-645 states: "THIS EQUIPMENT HAS BEEN ALIGNED WITH DUMMY DESTROYERS INSTALLED IN THE BASE. FREQUENCY ADJUSTMENTS SHOULD ALWAYS BE MADE WITH REAL OR DUMMY DESTROYERS INSTALLED, bottom right photo. BK-22 Relay Station, left photo.PE-101 Dynamotor Unit, right photo. PE-101 Dynamotor is missing the FT-255 Mount. TU-5 Radio Transmitter Tuning Unit, left photo.TU-10 Radio Transmitter Tuning Unit, right photo. TU-26 Radio Transmitter Tuning Unit, left photo. Bomb Hoist with handle. United States Consolidated B-24 Heavy Bomber NOSE PARTS United States Consolidated B-24 Heavy Bomber NOSE PARTS Stations (Frames) 0 through 1.1 - Bombardier and Navigator Station Type M-9 Norden Bomb Sight on original shipping mount, left photo. M-9 Bomb Sight nomenclature plate, right photo. This Bomb Sight was made by the Victor Adding Machine Company. Type A-1 Astrograph with storage case, left photo. The Astrograph used translucent maps of the constellations.These maps allowed the Navigator to plot a course at night. Also shown in the photo are spare bulbs and tools that were stored in the Astrograph case. The Type A-1 Astrograph was used with the MK II Astrocompass.Type B-5 Drift Meter, right photo. Type B-3A Bomb Release, left photo.Navigator''s Astrodome Window, right photo. MK II Astrocompass with storage box, left photo.Bombardiers heater assembly, right photo. This heater was made by The Stewart Warner Corporation. Nose Landing Gear Leg and Support Arms, left photo.Nose Landing Gear Doors, above photo.The B-24 Liberator was produced with two styles of Nose Landing Gear Doors, inward opening and outward opening.Port inward opening door, extreme left; and three starboard outward opening doors, right. Nose Landing Gear Hydraulic Leg Operating Assembly, above photo. The B-24 used only one hydraulic assembly per aircraft.- Nose Landing Gear Parts -Left photo, top to bottom, left to right:Support Arm Pivot, Door Bearing (for outward opening door), Port Door Opening Housing (for inward opening doors), Door Opening Arms (for left and right outward opening doors) and two Leg Scissors (only one would be used per aircraft). United States Consolidated B-24 Heavy Bomber TAIL PARTS United States Consolidated B-24 Heavy Bomber TAIL PARTS Stations (Frames) 6.1 through 10Ball Turret, Waist Guns and Tail Turret Type E-13 Gun Mount Adapter for left and right waist guns. The Type E-13 Adapter held the M-2 .50 caliber Machine Gun in the Type K-7 Side Gun Mount with C-19A Mount Adapter. The E-13 Adapter utilized the Type K-13 Compensating Gun Sight. This configuration was used in late B-24 Liberators that were produced with enclosed waist gun positions. Waist or Side Gun Ammunition Box, left and right photo. One ammunition box was provided per gun and contained 600 rounds of .50 caliber ammunition. The white label states: EMERGENCY, TO REMOVE AMMUNITION BOX, PULL HINGE PIN AFT, LIFT EDGE OF BOX AND REMOVE. The ammunition box in the left photo is show with a portion of the feed chute attached. Tail Turret Ammunition Boxes, left and right photo.These boxes were stacked just aft of the waist gun position and fed the tail turret via a long rigid feed chute. Tail Turret Hydraulic System, left photo. Missing from the system is the Hydraulic Turret Pump Motor.Main Entrance Door Installation, right photo. Mounted in Station 7.4 - 7.6. Hanger and Retraction Cylinder Assembly for the Type A-13 Ball Turret, left photo. Spare Parts Box for A-13 Ball Turret, above center photo.Spare Parts Box, inside view, above right photo. The spare parts box held extra fuses and brushes that may be needed for replacement during flight. Type LP-21 ADF "Football" Radio Antenna (left photo).This antenna was originally black, with stenciling "Do Not Paint". Contrary to instruction, this antenna has been painted silver with unit markings applied. It will be restored, when mated to the fuselage, in it''s original war-time flat-black finish.LP-21 Dehydrator, Loop Antenna (right photo). The LP-21 Dehydrator was used to draw moisture away from the LP-21 Antenna. The attachment brackets are also shown. Left photo: Inverter Transmitter Assembly Box, Tail Turret Power Switch Box and Inverter Transmitter Assembly Box.The Inverter Transmitter Assembly Box is located under the Radio Operator''s floor near Station (Frame) 3.1. Only one Inverter Transmitter Assembly Box was used per aircraft.Right photo: Unknown electrical box cover and unknown fuselage access panel, top row.Fuze Box Cover (Station 4.0), Bomb Release Signal Tail Light Shield and Wing Access Plate, center row.Wing Landing Light Relay Box Assembly Cover, bottom row. United States Consolidated B-24 Heavy Bomber WING PARTS United States Consolidated B-24 Heavy Bomber WING PARTS B-24 Main Landing Gear Tire with Hub Cap, left photo.The B-24 Liberator used a 56 Inch S.C. 16 ply tire with tube for the Main Landing Gear. This example was made by theRoyal Aircraft Tire Company. B-24 Main Landing Gear Tire with Hub , left photo.This example was made by the BF Goodrich Tire Company. B-24 Main Landing Gear Tire with Hub , left photo.This example was made by the Good Year Tire Company. Fairing Assembly - Wing Streamlined Wheel (left photo). This was mounted on the bottom of the wing, behind the landing gear wheel.Starboard Main Landing Gear Door (right photo). Port side Main Landing Gear Leg (left photo).Starboard side Main Landing Gear Leg(right photo). Main Landing Gear wing attachment parts (left photo). Other wing parts (right photo). Main Landing Gear Wheel Brake Assembly.(left photo).Two brake assemblies were used on each wheel. United States Consolidated B-24 Heavy Bomber BOMB BAY PARTS United States Consolidated B-24 Heavy Bomber BOMB BAY PARTS Stations (Frames) 4.0 through 6.0 - Bomb Bay Bomb racks (left and right photo). Two racks were located on each side of the bomb bay. Bomb Bay Doors, inside view (upper left and right photo, and above lower left and right photo). Bomb Bay Door damage, possibly from wartime anti-aircraft United States Consolidated B-24 Heavy Bomber ENGINE PARTS United States Consolidated B-24 Heavy Bomber ENGINE PARTS Cowl Flap (left photo). Cowl Panel (right photo). Engine parts (left photo). Oil tanks (right photo). One oil tank was mounted behind each engine on the B-24. United States Heavy Bomber Carry-On Equipment HEAVY BOMBER CARRY- ON EQUIPMENT Type A-4 Walk Around Oxygen Bottle with AN 6022-1 Regulator (left photo). Close-up of decal on Type A-4 bottle (right photo). This bottle was specifically made for the B-24 Liberator and has a part number of 32F24125. Type E-1 Bombardier''s Case (left photo). Type E-2 Bombardier''s Case (right photo). Type A-4 Navigator''s Dead Reckoning Case (left photo). Type A-6 Celestial Navigation Case (right photo). Type A-10A Sextant (left photo). Type AN 5854-1 Sextant (right photo). Pilot''s Navigation Kit (left photo). B-24 Flight Check List and B-24 Load Adjuster with case (right photo). Type A-1 Aircraft Food Container (left photo). Type FTG-3-1 Food Tray Galley (right photo). Type E-5 Emergency Sustenance Kit (left photo). Oil tanks (right photo). AN-R-2A One-Man Life Raft Parachute Kit (right photo). Type K-20 Aircraft Camera (left photo). Type A-14 Oxygen Mask with Storage Box and Stowage/Carry Bag (right photo). AN 6511-1 Seat Type Parachute Pack (left photo). Shipping boxes for .50 caliber ammunition (right photo). Ammunition for aircraft machine-guns was usually pre-linked when shipped. Ammunition would be removed from the shipping crate, carried onto the aircraft and stowed in the onboard ammunition boxes. AN-CRN-1 Navigation Buoy. The AN-CRN-1 was a low frequency buoy used for homing purposes on pre-set frequencies between 1400-1750KC by aircraft equipped with any production model of Radio Compass SCR-269. This system keyed at a rate of 180 times a minute and interrupted every thirty seconds by a signal code letter which may be either K, M, O, Q, X or Y. The SCR-578-B Gibson Girl radio set was the primary aircraft survival radio set used during World War Two. This system was used for survival communications when an aircrew was forced out of their aircraft. It had a reported range of 50 to 300 miles, dependent upon conditions affecting radio transmission. The nick-name Gibson Girl was given to this radio set due to its'' feminine curvy shape. The BC-778-D, or AN-CRT-3, radio set shown in the left photo is a crystal controlled radio that operates in the 500KC, Kilo Cycle range (known as Kilo Hertz/KHz today) and 8280KC International Maritime Frequency range. The 8280KC range was determined by the Joint Chiefs of Staff as the world-wide Air Sea Rescue Frequency. Oxygen bottle for oxy-acetylene welding set (left photo). This bottle was used by ground personnel for repairing aircraft. The center photo shows property markings: U.S. ARMY and AIR FORCES. The right photo shows bottle type: ICC-3A2260 H170928, W D (War Department) and dated 2 43 (February 1943). United States Heavy Bomber Carry-On Equipment United States Heavy Bomber Carry-On Equipment Type H-1 Emergency Bail Out Oxygen Bottle (left photo). This is one of the few examples of wartime aircraft equipment being marked U.S. AIRFORCE vice U.S. Army Air Force. Aircraft Instrument and Machine Gun Lubricating Oil can (right photo). Type B-2 Jungle Emergency Parachute Back Pad (left photo).This kit contained a Type E-3A Emergency Sustenance Kit, 2 Carlisle First Aid Kits, Folding Machete, Pocket Compass, Waterproof Match Container, Mosquito Lotion, 1 Box of 20 rounds of .45 caliber ammunition plus other items. Survival Food items (right photo).Type C; Ration Biscuits, Type C Ration Can, Wrigley''s Juicy Fruit Gum, Wrigley''s Doublemint Gum, Beech-Nut Gum, Malted Milk Tablets 1oz., Hershey''s Tropical Chocolate 2oz., Hershey''s Tropical Chocolate 1oz.,Nestle''s All-Weather Chocolate 2oz., Type D Ration 2oz., Type D Ration 4oz., Life Raft Ration Container, Cryst-O-Mint Lifesavers and Beech-Nut Rummies Survival Items (left photo).Emergency Fishing Kit container, Emergency Fishing Kit, Type JJ-1 Sea Water Desalting Kit, Type & A Life Boat Ration, Air Crew Lunch box and Emergency Ration. Tobacco Items (right photo).Chesterfield Cigarette Carton (10 packs of cigarettes), Camel Cigarette Carton (10 packs of cigarettes),4 packages of pre-1942 Lucky Strike Cigarettes, & Phillip Morris Cigarette Package and Chelsea Cigarette Page from a Type K Ration. The Lucky Strike Cigarette Package was changed from green to white between 1942 and 1943 to save green dye for other war production items. Signal Drift, Day, AN-MK-1 (top, left photo).Signal Drift AN-MK-IV (bottom left photo).These devices were used as a navigational aid over water for determining drift. These devices could also be used for marking a life raft position temporarily, when a longer burning smoke was not available. Type F-2 Utility Heater (left photo). This heater was used for heating aircraft components during cold weather operations. Type K-2 and Type K-3 (C-3A) Inter-Aircraft Control Lamp Assemblies (right photo).These lamps were used to signal from one aircraft to another. Type A-3 Headlight Flashlight Assembly (left photo). Type 42D4499 Ultra-Violet Headlight Flashlight Assembly (right photo).The Type 42D4499 Assembly was used to illuminate switches and gages during low light or night time flying operations. Type A-5 Inspection Flashlight Lamp Assembly (left photo). Army Air Force 5 gallon gasoline cans (left photo). Two variations of gasoline cans are shown marked: PROPERTY AIR FORCE U.S.A. (United States Army), above top and bottom right photo. Container, Liquid, Heat Insulated, 1 Gallon (left photo).Container, Liquid, Heat Insulated, 2 Gallon (right photo). Kit, First Aid, Jungle (left photo). This first aid kit was used for aircraft flying over jungle areas. United States Army Air Force Cargo Pilot AIR TRANSPORT COMMAND This Type A-2 Flight Jacket belonged to Captain August J. Kieser, USAAF. "Gus", as his friends call him, was born on February 11th, 1921. He entered the service in 1942 from New York. He received his training and went on to fly C-87 "Liberator Express" Cargo Aircraft with theA.T.C. in Tezpur, India from December 1944 to May 1945. During this time frame "Gus" logged over 750 Hours and 75 “Hump” Missions to China. The blue paint on the sleeves of the jacket are from when Gus painted his house after World War Two while wearing this jacket. On the left sleeve of the A-2 Jacket is the C.B.I. patch. This multi-piece patch was hand made in Tezpur, India in 1944. On the right sleeve of the A-2 Jacket is the A.A.F. patch. This multi-piece patch was hand made in Tezpur, India in 1944. On the left chest of the A-2 Jacket is a hand made name tape. The name tape was written in three different languages. This patch was hand made in Tezpur, India in 1944. This Type A-2 Flight Jacket was made by the MONARCH MFG CO. under contract W535A.C-23378. This is a photo of Captain Kieser wearing the A-2 Jacket in India, 1944-1945. Note the unofficial A.T.C. patch on the jacket and the privately purchased, non-regulation boots. "Gus" had these made in Brazil when he was passing through to Africa/Asia. Also note the other A-2 with "Blood Chit" on the chair next to "Gus". This jacket belonged to the gentleman taking the photo. This is the un-official A.T.C. patch. "Gus" removed this patch from his A-2 after the war, so that it could be displayed in his office. This patch was also made in Tezpur, India in 1944. This is the exact patch seen in the photo above. This patch will be re-applied to the A-2. This is one of the other patches that "Gus" had. It is a multi-piece squadron patch made for the India China Wing Air Transport Command. This patch was also made in Tezpur, India in 1944. This is the inside view of the hat that is on display with Captain Kieser''s A-2 Jacket. This hat was made by the "Streamline Company" of Los Angeles California. It is marked "FLIGHT CAP" for specific sale to Army Air Force Officers. This hat was specifically made with the "crushed" look, preferred by Army Air Force pilots. This is not an issue hat, but rather one privately purchased by service members. United States Army Air Force Cargo Pilot AIR TRANSPORT COMMAND August J. Kieser U.S. Army Air Force Cargo PilotAIR TRANSPORT COMMAND - A.T.C. China-Burma-India Theater 1944-1945 The is one of the pictures from Gus'' photo album. The original hand written caption read "50 CHINKS CHENGTU". These are Chinese soldiers that were being transported via C-87. Note the C-87 in the background with tail number 228. Also noteworthy are the civilian trucks unloading cargo from the front and side of the C-87. This photo is a C-47 in Chinese markings. U.S. and Chinese soldiers are in the foreground. Gus could not remember why he circled the man in the door. Here is a photo of Gus sitting on a surf board in Accra, British West Africa. Gus flew C-47s and C-46s for the A.T.C. in Accra from July 3 - Dec 26 1944. The non-regulation flight boots were made in Brazil. Note the issue summer pith helmet with Officers'' insignia. This is one of the pages from Gus'' pilot logbook. Note the various aircraft and tail numbers. In the A.T.C., C.B.I. cargo pilots were not assigned to specific aircraft. On this page Gus flew both C-87s and C-109s. This is another page for Gus'' pilot log. Note the entry on March 30th 1945 "HIT CHINK". During the take-off taxi, a local Chinese civilian ran in front of Gus'' C-87. The propeller blade killed the civilian. Gus recalled that some of the Chinese civilians that worked on the runway believed that running in front of the aircraft would pull the evil spirits away into the propellers. Many Chinese civilians were killed during this practice. United States Cargo GMC Truck 2 1/2 Ton G-508 Type: Truck, Cargo, LWB, 2 1/2 Ton, 6x6Government Number: G-508Model: CCKW 353Manufacturer: Yellow Truck & Coach Mfg Co. (Division of the General Motors Company, Pontiac Michigan) Date of Delivery: September 1942Serial Number: 189590Maintenance Manual: TM 9-801 Truck Details: Weight: Net 11,250 lbs., Payload 5,000 lbs., Gross 15,050 lbs. Ground Clearance: 10 inches Tires: 7.50 x 20 Split ring rim United States Waco CG-15A Glider United States Waco CG-15A Glider A.A.F. Serial Number: Unknown The Waco CG-15A Glider was the late war improvement of the earlier Waco CG-4A Glider. Three of the improvements made in the CG-15A was the use of stronger and thicker tubing for crew protection during landing, the addition of pilot/co-pilot doors in the cockpit for disembarkation after landing and the increased windscreen area which afforded the crew a better field of vision during flight and landing. CG-15A Glider in Europe (note the German aircraft in the background), left photo.CG-15A Glider being loaded/unloaded with a 1/4 Ton Truck, right photo. CG-15A Glider tow and radio connection, left photo. CG-15A Glider data plates, left top and bottom photos. Both plates are mounted above the center inside cockpit window frame. Waco CG-15 Specifications and Production Info: Type: Troop/Cargo Glider Payload: Ferrying/Troop Condition: 16 (Pilot/Co-Pilot plus 14 Troops) Jeep Condition: Pilot/Co-Pilot, 4 Troops plus Jeep Howitzer Condition: Pilot/Co-Pilot, 3 Gun Crew plus 75mm Gun Litter Condition: Pilot/Co-Pilot plus 6 Patients Specifications: Length: 48'' 10"Wingspan: 62'' 2.25"Empty Weight: 4000 lbs. Max Weight: 8035 lbs. Maximum At Takeoff Max Towing Speed: 180 mph Production: 1944/1945Total Aircraft Produced: XCG-15 (1), XCG-15A (2), CG-15A (875)Known Serial Numbers:45-5276 through 45-5660 CG-15A (385)45-12743 through 45-12784 CG-15A (42)45-12785 through 45-13232 CG-15A (448) United States Waco CG-4A Glider United States Waco CG-4A Hadrian Glider A.A.F. Serial Number: Unknown CG-4A Glider Cockpit, above photo. This cockpit has been used as a source of spare tubing for some time. The bottom section of the cockpit has been removed as well as the rear seat area and top tubing. CG-4A Glider Cockpit, above photo. Rear view of the glider cockpit. The Pilot and Co-Pilot seat support area remains intact with the seat belt D Rings still attached. The instrument panel support tubing also remains intact. This cockpit section does not appear to have had a Griswold Nose Crash Protection System United States Clark Airborne Bulldozer CA-1 Type: Airborne Bulldozer (Tractor Crawler) Government Number: G-XXX Model: CA-1Manufacturer: Clark Equipment Company Buchanan, Michigan Date of Delivery: March 25th 1944 Serial Number: 441475Registration Number: 9113429Maintenance Manual: TM 5-3020. Left side of the CA-1. The original side mounted stowage boxes are missing, as well as many small parts. The front blade is held in place with a section of chain due to loss of hydraulic pressure. Rear view of the CA-1, left picture. The original rear mounted winch is missing. Clark Equipment Company nomenclature plate, left picture. This plate is located on the right side of the engine compartment, just behind the blade. The original color of the plate was silver on green. Waukesha Motor Company nomenclature plate, right photo. This plate is located on the left side of the engine, just below the head. Auxiliary Shipping Name Plate, left picture. This plate is mounted under the Clark nomenclature plate. This style of plate was added to vehicles for overseas shipment. Corps of Engineers nomenclature plate. This plate is mounted on the rear of the front blade. The original Army registration number is visible on the right side of the hood. The only numbers still visible are "11342".The registration number "9113429" would have been painted on both sides of the hood. The Clark CA-1 Bulldozer was designed to be delivered by air. The left picture shows a CA-1 loaded for delivery by Glider Borne troops. The right picture shows a CA-1loaded for delivery by a C-47.This specific C-47 is painted in Normandy; air recognition markings for the invasion of France, June 1944.The CA-1 was used in the European and Pacific Theaters. Clark CA-1 Production Info: The following is a partial list of the Contract Numbers, Clark Serial Numbers and Army Registration Numbers for the Clark CA-1. The Clark Serial Number can be broken down to the following: Example: CA-1(Vehicle Type)43(Year of Production)162(Vehicle Number) Contract No. W-145-A eng.-511Tractor Serial No. CA-1431 to No. CA-143162 (162 Vehicles Produced) Army Registration No. 953463 to 953624Contract No. W-1088 eng. (MSP)-2460Tractor Serial No. CA-143193 to No. CA-143228 (135 Vehicles Produced) Army Registration No. 977511 to 977546Contract No. W-1088 eng. 2155Tractor Serial No. CA-143229 to No. CA-1431015 (716 Vehicles Produced) Army Registration No. 963300 to 964086Contract No. W-1088 eng. 2165Tractor Serial No. CA-1431016 to No. CA-1431121 (205 Vehicles Produced) Army Registration No. 963144 to 963249 German Afrika Korps Pioneer (Engineer) North Africa 1941 U.S. Army Engineer Special Brigade - Omaha Beach Normandy France June 6th 1944 U.S. Army Engineer Special Brigade - ESB Omaha Beach - Normandy France June 6th 1944 The Engineer Special Brigade or ESB was organized in England from existing Engineer Combat Groups to support the landings and subsequent supply operations over Omaha Beach during the Normandy landings. The ESB Engineers found themselves helping out the assault troops in the early fighting for Omaha Beach. The uniform set shown to the left is from the 5th or 6th ESB unit that fought in the DOG and CHARLIE sector of Omaha Beach Normandy. The M-1 flex bail helmet has the 5th/6th ESB white arc painted over the ESB insignia. A black rubber M-5 Assault gas mask is suspended from the soldiers neck. This soldier wears a Flannel OD issue shirt under his M-1941 Field Jacket. His M-1928 khaki haversack supports a M-1923 M-1 Garand Cartridge Belt, M-1916 Pistol Holster with M-1911 .45 cal. Pistol, three Mk II Fragmentation Hand Grenades and One CN-DM Gas Hand Grenade. Around the waist of this soldier is the USN made Duel Type Invasion Life Belt. Additionally this soldier carries two spare bandoleers for 8 clips of .30-06 M-1 Rifle ammunition. Reverse view of the ESB uniform showing a white horizontal band on the rear of the M-1 Helmet for NCO’s (Non Commissioned Officers). The reverse of the M-1923 Haversack shows the M-1 Bayonet with M-7 Scabbard on the left side, M-1910 Entrenching Tool with carrier and stowed M-1942 Mess Kit. Suspended from this soldiers M-1923 Cartridge Belt is a M-1910 Canteen and a M-1942 First Aid Kit. On the left side of the ESB uniform is a bag that contains Demolition Chain Blocks of M-1 High Explosive. This is a close-up view of the ESB uniform with the Demolition Bag being show. This bag was made of olive cotton material. Espria, Italy 1943/1944Espria, Italy lies on the western flank of Monte Cassino, between Naples and Rome. This area was the focal point of the French Expeditionary Corps during the Allied drive toward Monte Cassino during late 1943 through early 1944. The F.E.C. was primarily comprised of Moroccan soldiers. These Moroccan soldiers were specifically chosen for operations in Espria for their mountain fighting ability. The Moroccan soldiers fought swiftly and surgically in this campaign. The summit above Espria is home to a Middle-Age Monastery, which is now in ruins. This area was occupied by the German Army and was used as an observation point for the western control of the Winter Line. QuestMaster Jonny Reb& Ray is pointing eastward toward Monte Cassino. This photo illustrates how well this mountain top controlled much of the movement in the Lire Valley. This photo shows QuestMasters conducting archeology work within the ruins. Several U.S. .30-06 caliber fired projectiles were found in the soft-face of the Monastery slopes, as well as a vintage Coca-Cola bottle and one German 5 liter gas can. Additionally, on the road leading to the summit, a German gas mask carrier, a German 5cm 3 round mortar carrier and a World War One German 8cm Trench Art shell casing was found. Untied States SCR-578-B Gibson Girl Radio Set Untied States SCR-578-B Gibson Girl Radio Set BG-155-A Bag and M-390-A Parachute (left photo). The BG-155-A Bag held the entire SCR-578-BRadio Set.BC-778-D, or AN-CRT-3 Radio Set (right photo). T-69F/AMT-2 Radiosonde Transmitter, M-278-A Hydrogen Balloons (2 balloons were used in this set to fly the kite mast), M-308-B Signal Lamp (head mounted) and Flashlight (left photo).M-357-A Kite Assembly (used to fly the antenna), M-315 Hydrogen Generator Inflation Tubes and the Kite and Tube Storage Bag (right photo). M-315 Hydrogen Generator Containers (left photo).The M-315 Hydrogen Generator was used to inflate the M-278 Balloons. Pill Box Glyfada, Greece Herculanium Italy Herculanium Italy Herculanium, Italy lies to the southwest of the Italian volcano, Mount Vesuvius. During the year 79 A.D. Mount Vesuvius erupted, showering the Roman cities of Pompeii and Herculanium with molten rock and ash burying the two cities for almost 2000 years. Archeology work is still being conducted to reveal covered portions of the two cities. QuestMasters visited this famous city in 1998. QuestMasters has added this section to the Quest page for this specific photo. The emblem most frequently associated with Nazi Germany is the Swastika. This symbol was actually used several thousand years prior to the reign of the Third Reich. The left photo, taken in Herculanium, is a Greek cross with the ends of arms bent at counterclockwise right angles. This symbol was used as a sign of good luck, and was usually placed in the main doorway of a home or building as done in the left photo. The symbol of Nazi Germany was very similar, but was the exact mirror image with the arms bending clockwise. QuestMasters Home Page Welcome to QuestMasters - The foundation for the recovery and preservation of World War Two memorabilia for posterity. History of our Quest: The idea behind QuestMasters started during a recovery trip in Europe. After a long truck ride we realized that we were not only recovering and restoring World War Two memorabilia, but also going to the ends of the earth to do it. Hence - this is our Quest. Why we Quest? The Second World War lasted for over 6 years. For the United States, we were completely unprepared. Civilian companies quickly transformed into the American war machine. Small companies like Maytag, the washing machine company, made gun turrets for heavy bombers; Rock-Ola, a pin ball machine company, made rifles; Goodyear, the tire company, made fighter aircraft; Cadillac, the automobile company, made tank destroyers...and on and on. Farmboys, teachers, business men, barbers - men and women alike gave up their everyday jobs to put on a uniform, to fight for their country. They went to far-off lands, some unmapped - to fight and die. There was rationing and recycling. All gave some, and some gave all. Valor was a common virtue. And that is where we find ourselves, the children of a culture, responsible for the history of the sacrifice they made for us. Our goal: Our goal is the preservation of World War Two history. In the not too distant future, the breaths of those who were there making the history will no longer be able to tell the story. History is normally written by the victor, but this was a World War. It affected every country and every person, Allied and Axis. So, our focus is just that, to preserve the story, from both sides. It is our responsibility to tell their story. German Infantry Cart 18 German Type: Trailer 2 Wheel, Infantry, Hand Model: Unknown Manufacturer: Unknown Serial Number: Unknown This German trailer was recovered from Germany. The model or type is currently unknown. It is slightly larger than the Infantry Field Kart 8 (IF8 or JF8). The restoration of this cart (kart) was done in Germany. The original tires are present on the cart. The size of the tires is 3.50-19. Both tires are made by the Continental Tire Company. United States Navy Pratt Read LNE-1 Glider Trainer United States Navy Pratt Read LNE-1 Glider Trainer Aircraft LNE-1 Glider Mfg: Pratt Read & Co. Inc., Gould Aero. Div., Deep River ConnecticutMfg’s Model No.: PR-G1 Serial Number: 52U.S. Navy Serial Number: LNE-1 BuNo 31556U.S. Army Serial Number: TG-32-PR-43-39557Date Produced: 23 March 1943Maximum Glide or Dive Speed: 86 Knots; Wingspan: 54’ 6”; Length: 26’ 3”History:In 1943, a contract was ordered for 100 Type LNE-1 Gliders for the U.S. Navy from the Gould Aero Division of the Pratt Read Company. The LNE-1 was a two seat glider trainer. The proposed design was made for the training of Navy/Marine Corps glider pilots to land Marines in the Pacific during World War Two. The Navy glider program was quickly disbanded, as glider landings in the Pacific during WWII was not practical and 73 LNE-1’s were transferred to the United States Army Air Force. These LNE-1''s were re-designated TG-32''s. All 73 TG-32’s were put into storage at Souther Field, Americus Georgia through the end of WWII and sold through the Reconstruction Finance Corporation. By 1944, the LNE-1''s (now turned into U.S.A.A.F. TG-32''s) were selling for $500 (FOB Americus GA). The price could be reduced if the buyer went to Americus, assembled the glider at Souther Field, and flew it away as a complete aircraft. The only thing left behind was the shipping crate. These crates were then sold to local African-American share croppers who would use them for components of their houses. Markings/Paint: The LNE-1 had a fabric covered forward metal frame with wooden wings and tail. The vertical stabilizer. LNE-1 was painted in black on both sides of the rudder. No national insignia has been noted to have been painted on either side of the wings. When the LNE-1 Gliders were transferred to the U.S.A.A.F. the aircraft remained painted in Navy yellow with the addition of A.A.F. serial number painted on the shipping crate. The LNE-1/TG-32''s were not uncrated by the U.S.A.A.F. The instrument panel was painted black. Interior cockpit was painted “interior green” to include the plywood seats. Release knob was painted red. Several LNE-1’s have been noted with black group markings painted forward of “U.S.NAVY” on the tail boom.LNE-1 BuNo 31556 still retains the original nose tire, release knob, control sticks and rudder pedals. The fabric covering, windows and plywood seats have long since rotted away. Known serial number range:XLNE-1 BuNo 31505 - 31506LNE-1 BuNo 31507 - 31585 (Contract cancelled at Serial Number 31580)andBuNo 34115 - 34134 (Not Delivered) Army Air Force Serial Numbers: TG-32-PR 43-39509 - 43-39578 and 43-43329 - 43-43331Known surviving examples:#31506 Factory prototype: Wings of Eagles Discovery Center, Elmira Corning Regional Airport, NY.#31508 (The first TG-32): Under restoration for flight-status at Tehachapi, CA.#31509 Cockpit Only: In private storage in California.#31518: Under restoration: Seattle Museum of Flight in Renton, WA.#31521: THE ONLY AIRWORTHY LNE-1: Scott Airpark in Lovettsville VA.#31523: In storage: National Museum of the United States Air Force Dayton, OH.#31525 Cockpit Only: In private storage in California.#31527: Under restoration for flight status: Sandhill Crane Soaring, Richmond Field Gregory, MI.#31537: On public display: Hoosier Warbird Museum, DeKalb Regional Airport Auburn, IN#31540: In storage: Southern Museum of Flight in Birmingham, AL.#31542 In storage: Silent Wings Museum in Lubbock, TX.#31543: In storage: Tehachapi, CA#31556 Cockpit Only: QuestMasters Collection.#31558 In storage: Silent Wings Museum in Lubbock, TX.#31561: On public display: New England Air Museum Bradley International Airport in CT.#31569: In storage: Sandhill Crane Soaring: Richmond Field near Gregory, MI.#31570 Fuselage Only: In private storage in Tennessee.#31572: On display: Bonanzaville Aviation Museum in Fargo ND.#31577 Cockpit Only: In private storage in MI.#31578: On display: Aviation Museum of Kentucky; Bluegrass Airport in Lexington, KY. United States Airborne 75mm Howitzer M18 Paracaisson Cart United States Airborne 75mm Howitzer M18 Paracaisson Cart The M18 was used by Airborne Artillery units to air drop 75mm ammunition for the M8 Airborne Pack Howitzer. The M18 was air dropped via parachute as a cylindrical container. The container separated into two parts: the cart bottom and the top cover. The top cover was a simplified version of the cart bottom. The top cover was discarded after assembly. When the M18 was deployed, the wheels, tow handle and cables were stored inside of the container. The M18 could carry 18 rounds of ammunition in cardboard storage containers. The ammunition/storage dividers are missing on the inside of this cart. Additionally, the tire shown on this cart is not original. The original 4.00-8 tires were made by Goodyear. The above two pictures are from an original wartime manual. The picture to the left shows six M9A2 paracaissons mounted under a C-47 Cargo Aircraft. The photo to the right is a deployed empty and then fully loaded M9A2 ready for towing. This tire was made by the GOOD YEAR Tire Company. Two of these tires were found on a Cub Cadet 102 tractor. The tread style is exactly the same as the original M9A2 tire, but the size is slightly larger. The size on this tire is 4.80/4.00-8. These tires will be used on the restoration of this M18. This tire, left and above, is mounted on a museum M9A2 Paracaission. The tire is made by BF GOODRICH - SILVERTOWN, size 4.00-8.To view this M9A2 click here: HANDCARTZ M9A2 This tire (above four photos) is made by GOOD YEAR, size 4.00-8.This is one of two tires that will be used to restore the M9A2 owned by Handcartz To view this M9A2 click here: HANDCARTZ M9A2 The original rims have been disassembled for restoration, left photo. The inside of the rim reveals the original color of the M18 as well as the original primer. The M18 was primed in Yellow Zinc Chromate due to being made of aluminum. This M18 will be restored using Olive Drab 33070. Restored rim with Yellow Zinc Chromate Primer, left photo. The outer rim half is stamped with the part number 7131535 The inner rim half is stamped with the part number 7131536 The center hub is stamped with the part number B7119364 History Three types of Airborne Paracaissons were used during World War Two: M9 (Wood),M9A2 (Steel) and the M18 (Aluminum Alloy).The Aluminum Alloy Paracrate Load for the M8 Howitzer was deployed in 9 loads: Paracrate Load M1:Howitzer Trail Assembly, Paracrate M1, Drawbar, Lifting Bar. Paracrate Load M2:Howitzer Rear Trail, Howitzer Axle and Traversing Mechanism, Howitzer Trail Handspike, Bore Brush Staff, Spare Parts and Tool Box, Caster Wheel and Paracrate M2.Paracrate Load M13:Howitzer Bottom Sleigh, Aiming Circle with Case, Lifting Bar and Paracrate M13.Paracrate Load M14:Howitzer Cradle, Howitzer Top Sleigh, Lifting Bar and Paracrate M14.Paracrate Load M15:Howitzer Tube, Lifting bar and Paracrate M15.Paracrate Load M16:Howitzer Breech Assy., Telescope and Mount, Paracrate M16.Paracrate Load M7A1:Howitzer Wheels (2) and Paracrate M7A1.Parachest Load M17:Ammunition (10 rounds in fiber containers) and Parachest M17.Paracaisson Load M18:Ammunition (8 rounds in fiber containers) and Paracaisson M18. Untied States Martin M-250 Top Turret Untied States Martin M-250 CE B-24 Top Turret Untied States Willys Trailer 1/4 Ton MB-T Type: Trailer 2 Wheel 1/4 Ton Government Number: G-605Model: MB-T Manufacturer: Willys Overland Date of Delivery: November 1942Serial Number: 12494Parts Manual: TM 10-1230Maintenance Manual TM 10-1230 This is the original data plate that was found on this MB-T. The two holes in the center of the plate are from a bracket that was added after the war. It should be noted that the two "4''s" in the serial number "12494" are different fonts from different stamping sets. The first "4" has an open top, the second "4" has a closed top. This is a replica plate from Dataplates4u in Holland: http://www.dataplates4u.com New Old Stock Inter-Vehicle cable, left photo. The bakelite connector is made by the Warner Electric Brake MFG Co. Left and Right Tail Light Assy, above photo. The Willys MB-T used Corcoran-Brown tail light assy''s. The face of the light is marked C-B and the housing is marked Corcoran-Brown on the top. Trailer Details: Weight: Net 550 lbs., Payload 500 lbs., Gross 1050 lbs. Loading Height: 22 inches Ground Clearance: 12 1/2 inches Tires: 6.00x16 with two piece combat rims Tail Lights and Reflectors made by: Corcoran-Brown United States Navy Sailor NCDU Omaha Beach - Normandy France June 6th 1944 U.S. Navy Sailor NCDU - Navy Combat Demolition Unit 7 Omaha Beach - Normandy France June 6th 1944 QuestMasters Ordnance QuestMasters Ordnance Back row: Schrapnellmine 35 (S.Mi.35) storage box for three mines, Fuze crimping tool,1 Kilogram Demolition Charge with Z.Z.42 Fuze and 3 Kilogram Demolition Charge.Center row: S-Mine 35 (S.Mi.35) with S.Mi.Z.35 Fuze, Stock-Mine 43 (STo.Mi.43) with Z.Z.35 Fuze, Glasmine 43 (Gl.Mi.43) with Hebelzunder Fuze and Kraftstoff Granate (Gasoline Grenade).Front row: Zeit Zunder 37 (Zt.Z.f. SpBu 37) time fuze, two Z.Z.35 Fuzes, Z.Z.42 Fuze, D.Z.35 Fuze, S.Mi.Z.35 Fuze, Sprengkorper 28 Mine Charge with Z.Z.42 Fuze, Teller Mine Zunder 35 (T.Mi.Z.35)Trip Wire Mine Fuze and Blendkorper 2 H (M2H) Glass Smoke Grenade. 8,8cm Raketenpanzerbuchse (Rocket Launcher)Ordnance tan painted carrying box (top of photo) and natural wood carrying box (bottom of photo).Raketen Munition 4322 (Rocket) in center of photo.The 4322 Rocket could be used with the Raketenpanzerbuchse 43 or 54. The RPzB 43 and 54 were nicknamed Ofenrohr (Stovepipe) and Panzerschrek (Tank Terror) by the Germans. It had an effective range of 150 meters and could penetrate all Allied Armor during World War Two. United States Army Air Force Northrop P-61 Black Widow U.S. Army Air Force Northrop P-61A Black Widow Night Fighter P-61A Black Widow nose section, left photo. The nose section of the P-61 is made of fiberglass for the SCR-720A Radar set. This Radome was found in Hawaii in the mid 1990''s. Some of original black paint and red stenciling remain on the outside of the Radome. Unfortunately the radome is slightly cracked due to 50+ years of unloving exposure. P-61A Black Widow gunners canopy, left photo. The P-61 had two canopies: one for the pilot and one for the gunner (as seen in the above black and white photo). This canopy was recovered from a scrap yard in Ewa, Hawaii U.S.A. Many P-61''s and B-24''s were scrapped at Ewa after the war. This canopy was traded to the Mid-Atlantic Air Museum for the restoration of their P-61 in 1996. P-61A Black Widow engine propeller assembly for the R-2800 engine, left photo. This assembly retains almost all of its original paint and stenciling. This propeller assembly was not recovered by QuestMasters. German 7,5cm PAK 40 Anti-Tank Cannon Country: Germany Type: 7,5cm PAK 40Model: Panzer Abwehr Kanonen 40 Manufacturer: Not Available Date: 1944Serial Number: Not Available Right side of the PAK 40. The wheels on this cannon are the late-war style with holes. The holes were added to save rubber. Two 7,5cm (75mm) Shell Casings. The PAK 40 used the model 6340 shell casing with C/12nA percussion fired primer. The suffix St was applied to the shell casing or primer type if it was made of Stahl or Steel, i.e. 6340 St or C/12nASt. PAK 40 Cleaning Rod, top of photo. PAK 40 Bore Brush, bottom of photo QuestMasters is currently looking for additional shell casings, projectiles, ammunition cans, and a gun sight for the restoration of this PAK 40. German Panther V Road Wheel German Panzerkampfwagen V Panther; Ausf. G tank outer road wheel. The German Panther tank utilized 8 outer road wheels (four on each side). This road wheel was recovered from Bastogne Belgium in 1998. This history of this specific vehicle is unknown. The large shell hole is approximately 75mm''s. This Panther was moving when it was hit, which is clearly indicated by the track teeth indentations on the rubber wheel. Manufacturer markings on the rubber portion of wheel: No 935 jnk, left photo; 860/100-D, right photo. B-24 Nose Turret The Emerson A-15 Electric Nose Turret was used on all late war B-24 Liberators, except those produced at the Consolidated San Diego plant.B-24 Liberators produced at the Consolidated San Diego plant used modified A-6B Hydraulic Tail Turrets mounted in the front of the aircraft (as seen on the B-24 in the black and white picture above).Early B-24 Liberators that were produced with " Green House " noses were also depot modified with A-6 or A-6B Hydraulic Tail Turrets mounted in the nose. A-15 Gunner Seat area, above left and right photo. The control column grip assembly is missing from this turret. AN-M2 .50 Caliber Machine Gun left mount, above left photo. Turret Control box, above right photo. Oxygen System Assembly, above left photo. The A-15 Nose Turret used an A-12A Diluter Demand Oxygen Regulator with Oxygen Blinker and Pressure Gauge to regulate the oxygen to the turret gunner during high altitude flight.K-11 Gun Sight Mount and Drive Box, above right photo. K-11 Compensating Gun Sight, left photo.K-11 Compensating Gun Sight Nomenclature Plate, above photo. The K-11 Compensating Gun Sight was a late war innovation that used the aircraft altitude and speed with the direct correlation of where the weapon was pointed to calculate the reticle. The aircraft altitude and speed was programmed on the rear of the sight. The correlation was determined by drive lines that connected the K-11 Sight to the turret. E-3 Generator Type: Generator, 3.0 KW, 1 Phase Government Number: None Model: E-3Manufacturer: O''Keefe & Merritt Co. Date of Delivery: 1944Serial Number: 2188 Model E-3 Generator Set nomenclature plate, left photo. This plate is mounted on the outside of the control panel door. Control panel with door open, right photo. The control panel is located on the end of the generator set. Note that this generator has several different styles of 120 volt receptacles. Engine compartment with doors open, left photo. O''Keefe & Merritt Model E-3 Synchronous 1 Phase Generator nomenclature plate, above photo. Right side of E-3 Generator Set, left photo. Rear of the E-3 Generator Set, right photo. The rear of the E-3 Generator houses the fire extinguisher. The door for the fire extinguisher is marked in raised letters " FIRE EXTINGUISHER INSIDE HERE ". The bracket is the standard style used on most U.S. WWII military vehicles. B-24 Waist Guns Left Waist Gun Assembly, above photo. The late B-24 waist gun comprised of an AN-M2 .50 caliber machine gun attached to a Type E-13 Gun Mount Adapter, Type K-7 Mount with Type C-19A Mount Adapter and a Type K-13 Compensating Gun Sight. On the top cover of theAN-M2 is a Type J-4 Gun Heater. This configuration was only used in late B-24 Liberators that were produced with enclosed waist gun positions. E-13 Gun Mount Adapter, above left photo. This is what the E-13 Adapters looked like when they were originally obtained. The E-13 in the rear of the photo was missing the "duck bill" sight mount, and grips when this photo was taken. This has been corrected.E-13 Gun Mount Adapter Nomenclature Plate, above right photo. AN-M2 .50 Caliber Machine Gun, above photo. The AN-M2 was used in all positions on the B-24 Liberator - the Ball Turret, Nose Turret, Top Turret, Tail Turret and both Waist Gun Positions. The two AN-M2s pictured above are compliant with BATFE standards by having a replica 1/2" thick right side plate, prohibiting the fitting of any internal machine gun parts. The AN-M2 pictured above is shown prior to restoration. One of the details that differentiates the AN-M2 .50 Caliber Aircraft Machine Gun from the M-2 Ground Machine Gun is the top cover. The top cover has the added provisions to aid opening while wearing heavy gloves, as seen on the rear side and top of the cover. This photo also shows the thick cuts made during the demilitarization process. This AN-M2 has not been fully restored. K-7 Mount, rear and front, above two photos. The K-7 Mount supported the entire AN-M2 .50 caliber machine gun to the side of the aircraft. Note the large springs housed on the inside of the mount. These springs were added to compensate for the weight of the gun assembly. This afforded the gunner a better ability to handle the weapon and not fight the weight of the weapon when engaged. J-4 Gun Heater, left photo. The Gun Heater was electrically powered and kept the guns warm at high altitudes to avoid freezing when not firing.C-19A Gun Mount Adapter, right photo. This connected the E-13 Gun Mount Adapter to the K-7 Mount. K-13 Compensating Gun Sight, left photo.K-13 Nomenclature Plate, above photo. The K-13 Compensating Gun Sight was a late war innovation that used the aircraft altitude and speed with the direct correlation of where the weapon was pointed to calculate the reticle. The aircraft altitude and speed was programmed on the rear of the sight. The correlation was determined by drive lines that connected the K-13 Sight to the K-7 Mount. U.S. Army 1st Lieutenant 2nd Ranger Battalion Omaha Beach - Normandy France June 6th 1944 This officer illustrates the equipment that was worn by an officer assigned to Force B, Company C, 2nd Ranger Battalion during the invasion of Normandy France June 6th 1944. The responsibility of Force B was to secure the smaller cliffs to the west of Pointe de la Percee. C/2 Rangers landed on the Charlie Sector of Omaha Beach at H+1 (H-Hour plus 1 Minute). After they eliminated the German strong points and gun positions from the right flank of Omaha Beach they were instructed to link up with Force A: D, E and F Company, 2nd Ranger Battalion at Pointe du Hoc. Rear view, left photo. Close-up view of Rangers patch, above photo. This patch was specifically designed for the Invasion of Normandy to replace the earlier Ranger Battalion Scroll patch. Rear view of M-1 Helmet, left photo. This helmet has been painted with the 2nd Ranger Battalion Diamond painted over a white vertical stripe, which was the designation for officers. Inside view of M-1 Helmet Liner, right photo. This liner was made by Westinghouse. The suspension is made from Triple Herringbone Twill (THBT) and is held to the liner with green A washers. Service Boots with M-1938 Leggings, left photo. The M-1938 Leggings shown here were made by Meyers & Son MFG. Co. 2-25-42.Service Boots, right photo. The Service Boots were all leather with ten eyelets and featured a full capped toe. The rubber soles were made by BF Goodrich. These boots are a size 8EE. BC-611-F Handie-Talkie Radio, left photo. M-1 Thompson Submachine-gun, above photo. This M-1 Thompson Submachine-gun has a replica all aluminum BATFE approved dummy receiver from IMA-USA. M-1 Helmet and Camouflage Net with Officer markings on front and rearM-1 Helmet Liner, made by WestinghouseM-1941 Jacket with Rangers Diamond Patch on right sleeveM-1936 Pistol Belt, made by A.M.Co.1943M-1936 SuspendersM-1941 Mounted Canteen Cover, made by J.A. Shoe 1943M-1910 Canteen, made by S.M.CO 1944M-1910 Canteen Cup, made by FOLEY MFG. CO. 1944M-1910 First Aid Pouch, made by J.Q.M.D. 1942 and owner marked S1216M-1916 Pistol Holster, made by MILWAUKE SADDLERY CO. 1943M-1923 Pistol Magazine Pouch, made by B.B. INC. 1942Submachine-gun Magazine Pouch, five pocket M-1936 Field Mussett Bag, made by HAMLIN CANVAS GOODS CO. 1942 and owner marked G-8490M-1938 Dispatch Case, made by HOFF -42-M-7 Assault Gas Mask CarrierM-17 Binocular CaseBC-611-F Radio, made by ELECTRICAL RESEARCH LABORATORIES INC.USN Life Preserver, made by EAGLE RUBBER CO. INC. ASHLAND OHIO Service Boots, soles made by BF GoodrichM-1938 Leggings, made by MEYERS & SON MFG CO. 2-25-42M-1 Thompson Submachine-gun, made by - UNKNOWN - original receiver replaced U.S. Army Sergeant 2nd Ranger Battalion Omaha Beach - Normandy France June 6th 1944 This Non-Commissioned Officer (NCO) Sergeant illustrates the equipment that was worn by a NCO assigned to Force B, Company C, 2nd Ranger Battalion during the invasion of Normandy France June 6th 1944.The responsibility of Force B was to secure the smaller cliffs to the west of Pointe de la Percee. C/2 Rangers landed on the Charlie Sector of Omaha Beach at H+1 (H-Hour plus 1 Minute). After they eliminated the German strong points and gun positions from the right flank of Omaha Beach they were instructed to link up with Force A: D, E and F Company, 2nd Ranger Battalion at Pointe du Hoc. Rear view, left photo. Rear view of M-1 Helmet, above photo. This helmet has been painted with the 2nd Ranger Battalion Diamond painted above a white horizontal stripe, which was the designation for Non-Commissioned Officers. Inside view of M-1 Helmet Liner, left photo. This liner was made by Mine Safety Apparatus (MSA). The suspension is made from Single Herringbone Twill (SHBT) and is held to the liner with early zinc plated A washers. M-1 Helmet and Camouflage Net with NCO markings on rear M-1 Helmet Liner, made by Mine Safety Apparatus (MSA) Winter Combat Tanker Jacket with Rangers Diamond Patch on left sleeve M-1923 Dismounted Cartridge Belt, made by M.E.CO. 1943 (BRITISH MADE) M-1928 Haversack with M-1928 Pack Carrier, made by M.W.&S. CO. LTD 1944 (BRITISH MADE) M-1941 Mounted Canteen Cover, made by BAKER-ATWOOD LTD. CO. 1941 M-1910 Canteen, made by A.G.M.CO. 1918 M-1910 Canteen Cup, made by T.A.U.CO. 1941 M-1923 First Aid Pouch, made by M.W.&S. CO. LTD 1944 (BRITISH MADE) M-1916 Pistol Holster, made by SEARS 1942 M-1910 Entrenching Tool Cover, made by W.L. DUMAS MFG. CO. 1943 M-1910 Entrenching Tool M-7 Assault Gas Mask Carrier USN Life Preserver, made by EAGLE RUBBER CO. INC. ASHLAND OHIO M-1 Bayonet, made by United Cutlery (U.C.) M-1 Fragmentation Grenade M-1 Garand Cloth Bandoleer U.S. Army Medic 2nd Ranger Battalion Omaha Beach - Normandy France June 6th 1944 This Soldier illustrates the equipment that was worn by a Medic assigned to Force B, Company C, 2nd Ranger Battalion during the invasion of Normandy France June 6th 1944.The responsibility of Force B was to secure the smaller cliffs to the west of Pointe de la Percee. C/2 Rangers landed on the Charlie Sector of Omaha Beach at H+1 (H-Hour plus 1 Minute). After they eliminated the German strong points and gun positions from the right flank of Omaha Beach they were instructed to link up with Force A: D, E and F Company, 2nd Ranger Battalion at Pointe du Hoc. Rear view of M-1 Helmet, left photo. This helmet has been painted with the 2nd Ranger Battalion Diamond with Medic red crosses painted on the sides and front. Helmet Liner, right photo. This liner was made by FIRESTONE. The suspension is made from Triple Herringbone Twill (THBT) and is held to the liner with green A washers. Service Boots with M-1938 Leggings, left photo. The M-1938 Leggings shown here were made by Meyers & Son MFG. Co. 2-25-42.Service Boots, right photo. The Service Boots were all leather with ten eyelets and featured a full capped toe. The rubber soles were made by EJ HTS. These boots are a size 7 1/2 E. Medic''s bags with contents, left photo. Four types of Carlisle bandages, right photo. Early copper can with orange paint (made by BAUER & BLACK) top, early copper can with olive paint (made by BAUER & BLACK) left center, early steel can with olive paint (made by BAUER & BLACK) right center and late steel can with olive drab paint (made by HANDY PAD SUPPLY CO) bottom. Reverse of Medic''s Arm Band (left photo).The arm band is marked: PROPERTY OFMEDICAL DEPARTMENT, U.S. ARMYIN CONFORMITY WITHARTICLE 21 INTERNATIONAL RED CROSS CONVENTIONGENEVA 1929IDENTITY CARD NO. _________This arm band has the Medic''s Geneva Convention Number V 37489. M-1 Helmet and Camouflage Net with Medic''s markings M-1 Helmet Liner, made by FIRESTONE M-1941 Field Jacket with Rangers Diamond Patch on left sleeve M-1923 Dismounted Cartridge Belt, made by NERIS 1943 M-1936 Field Musette Bag, made by AIRTRESS MIDLAND 1943 M-1941 Mounted Canteen Cover, made by FOLEY MFG CO. 1942 M-1910 Canteen, made by S.M.CO. 1943 M-1941 Mounted Canteen Cover, made by H.S.CO. 1942 M-1910 Canteen, made by VOLLRATH 1943 M-1942 First Aid Pouch, made by JQMD 1944 Medical Bag, pair M-7 Assault Gas Mask Carrier USN Life Preserver, made by THE FIRESTONE TIRE & RUBBER CO. AKRON OHIO U.S. Army Private First Class 2nd Ranger Battalion Omaha Beach - Normandy France June 6th 1944 This Soldier illustrates the equipment that was worn by a rifleman assigned to Force B, Company C, 2nd Ranger Battalion during the invasion of Normandy France June 6th 1944.The responsibility of Force B was to secure the smaller cliffs to the west of Pointe de la Percee. C/2 Rangers landed on the Charlie Sector of Omaha Beach at H+1 (H-Hour plus 1 Minute). After they eliminated the German strong points and gun positions from the right flank of Omaha Beach they were instructed to link up with Force A: D, E and F Company, 2nd Ranger Battalion at Pointe du Hoc. Rear view of M-1 Helmet, left photo. This helmet has been painted with the 2nd Ranger Battalion Diamond. Inside view of M-1 Helmet Liner, right photo. This liner was made by Westinghouse. The suspension is made from Single Herringbone Twill (SHBT) and is held to the liner with black brass A washers. M-1 Helmet M-1 Helmet Liner, made by Westinghouse M-1941 Jacket with Rangers Diamond Patch on left sleeve M-1936 Pistol Belt M-1910 Haversack, made by L-D INC. 7-18 M-1941 Mounted Canteen Cover, owner marked M. KRPAN K-7540 M-1910 Canteen, made by S.M.CO. 1943 M-1942 First Aid Pouch, made by B.B.S.CO. 1943 M-1 Carbine Magazine Pocket, made by AVERY 1943 M-1 Carbine Magazine Pocket, made by KADY 1943 M-1942 18” Machete, dated 1944 M-7 Assault Gas Mask Carrier USN Life Preserver, made by DURKEE-ATWOOD CO. MPLS. M-1 Carbine Ammunition Bandoleer 1944 B-29 "Super Fortress" 42-24791 "The Big Time Operator"
PEX Compact Crimping Tool by Mil3; Original Made in USA The authentic, original PEX crimp tools from Mil3. Plumbers have used Crimpmaker tools for 20 years. Professional plumbers, these compact crimpers will let your installers crimp PEX rings in tight places. Factory repair available at low costs. No other crimpers will ever measure up for easy PEX plumbing installation.
Welcome to Shejwal Industries, Nashik | an ISO Certified company | a leading Electrical Component Manufacturing Company | Manufacturer of durable and all types of quality lugs | Our offered products are available in various specifications in terms of models, sizes, shapes and finishes shejwal industries, nashik, iso certified company, electrical component manufacturer, quality lugs manufacturer, maharashtra, mr satish b shejwal, mr mukund b shejwal, manufacturer of aluminum pressure die casting components, power transmission product manufacturers, manufacturer of aluminum long barrel tubular ends, aluminum long barrel tubular terminals ends, lugs supplier and manufacturer, assembly of cable lugs and connectors, cable lugs and connectors, manufacturer of aluminum cable lugs and connectors, aluminum tubular terminal ends, assembly of cable lugs and connectors, bi metallic lugs, bi metallic connector, bi metakkic lugs, assembly of cable lugs and connectors, aluminum gravity die casting, aluminum pressure die casting, high power wire connectors, high voltage electrical cable terminations, cable connectors manufacturer, aluminium connectors, copper connectors, wire terminal manufacturer in india, solderless crimping to aluminium, manufacture and supply cable termination accessories
Brass Copper & Alloy India Limited, Valsad - Exporter of Crimping Type Copper Tubular Cable Terminal Ends - Bell Mout and Crimping Type Copper Tubular Cable Terminal Ends Exporter of Crimping Type Copper Tubular Cable Terminal Ends - Bell Mout, Crimping Type Copper Tubular Cable Terminal Ends & Tinned Copper Tubular Cable Lugs offered by Brass Copper & Alloy India Limited from Valsad, Gujarat, India
Partex Direct Partex Direct is the new online store from Partex UK. Partex manufacture and distribute marking systems and electrical wiring accessories such as cable ties, crimp terminals, cord end ferrules, copper tube terminals, crimping tools, terminals blocks and pvc insulation tape.
New and Used Hydraulic Hose and Tube Equipment | TrySurplus.com We offer new, used and reconditioned hydraulic hose assembly, tube fabricating equipment, hose crimpers and more. Shop our entire inventory at TrySurplus.com!
Mahesh Engineering Services [www.maheshengg.com] Power & Control Switchgears, Power Cables & Wires, Instrumentation, Automation, Panel Board Accessories & Industrial Electricals & Engineering Mahesh Engineering Services, since 1974, is a Professionally Managed Trading Company involved in Industrial Electrical Materials. We are Authorized Stockists / Distributors / Dealers / Channel Partners of various reputable companies from India and abroad like Larsen & Toubro Limited - Electrical Business Group, Finolex Cables Limited, Hager Electro SA, Delta Drives and others, Mahesh Engineering Services [www.maheshengg.com] Power & Control Switchgears, Power Cables & Wires, Instrumentation, Automation, Panel Board Accessories & Industrial Electricals & Engineering, In Kolhapur, Maharashtra, India
Quality Automatic Wire Crimping Machine & Terminal Crimping Machine Manufacturer Dongguan Senjia Machinery Co., Ltd. is best Automatic Wire Crimping Machine, Terminal Crimping Machine and Wire Cut Strip Crimp Machine supplier, we has good quality products & service from China.
Hydraulic Hose Crimping Machine Manufacturer,Hydraulic Hose Skiving Machine Supplier|India DEVANSHI HYDROMATIC INC - Manufacturer,supplier and exporter of wide array of hydraulic products such as hydraulic hose crimping machine,hydraulic hose skiving machine for industrial sector.Located in Gujarat, India.
Innovation of the High Speed Cigarette Machine The purpose of this site is to introduce and trace the innovation in the evolution of the cigarette making machines in early days. Introduces the reason why cigarette making machine continued to be the highest speed among production machines. Also answers to the question of ''Who invented the cigarette making machine ?'' by reffering the US-patents and the preserved historical machines.Also inruduce the history of nucleonic weight controller for cigarette making machine.Also introduces the high speed continuous motion chipmounter utilized cycloid curve. 本サイトでは黎明期のシガレット製造機の進化を辿り、その中の革新的発明を紹介します。シガレット製造機は誰が発明したのか、米国特許と保存されている貴重な機械により検証します。また、シガレット製造機用の放射線検出器の歴史を紹介します。またサイクロイド曲線を利用した高速連続式チップマウンターを紹介します
Impex Tools, Pune - Wholesale Trader of Torque Wrenches & Torque Tools and Hand Tools Wholesale Trader of Torque Wrenches & Torque Tools, Hand Tools & IMADA Japan Force Measuring Instruments offered by Impex Tools from Pune, Maharashtra, India
China Cutting Machine,Taping Automatic Machine,Terminal Crimping Machine Manufacturer and Supplier China leading manufacturers and suppliers of Cutting Machine, and we are specialize in Cutting Machine,Taping Automatic Machine,Terminal Crimping Machine,etc.
China Hose Crimping Machine,Metal Band Saw Machine,Butt Weld Fittings Manufacturer and Supplier China leading manufacturers and suppliers of Hose Crimping Machine, and we are specialize in Metal Band Saw Machine,Butt Weld Fittings,Flanges,etc.
Wilhelm Dreusicke GmbH & Co. KG Dreusicke, Germany, is supplier of rubber rollers to the industry, custom tool kits and hand tools for maintenance of electronic equipment and spare parts for computer printers
Sibass Electric Private Limited - Manufacturer of Control Gear & Automotion Products from Chennai Control Gear, Automotion Products & Industrial Sockets Manufacturer offered by Sibass Electric Private Limited from Chennai, Tamil Nadu, India
Quality Wire Stripping Machines & Tube Cutting Machines Manufacturer Shenzhen Fortune Sky Technology Co.,Ltd is best Wire Stripping Machines, Tube Cutting Machines and Wire Crimping Machines supplier, we has good quality products & service from China.
Claydon Architectural Metalwork: Portfolio | Decorative Railings & Gates Claydon Architectural Metalwork (CAM) uses patented tube crushing techniques to produce a range of decorative railings, security railings, gates, guardrail, barriers and fencing with complementary street furniture, including seats, benches, litter bins and cycle stands.
Pipe Tools | Pipe Expander, HAVC Refrigeration Tools from PexTools.com – pextools.com PexTools.com is a leading pipe tools provider, our tools for HAVC and Refrigeration systems, including pipe crimping tools,pex expander,pipe cutter and others.